Cooper Lighting IMI-572 installation instructions Installation Instructions, Sheet 1 of

Models: IMI-572

1 5
Download 5 pages 59.02 Kb
Page 1
Image 1
INSTALLATION INSTRUCTIONS

TM

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

Ascent/Strut Fixtures

Sheet 1 of 5

4/26/04 IMI-572

General: Upon receipt of fixture thoroughly inspect for any freight damage, which should be brought to the attention of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the housing to assure you have received the correct merchandise.

Safety: This fixture must be wired in accordance with the national electrical code and applicable local codes and ordinance. Proper grounding is required to insure personal safety. Carefully observe grounding procedure. All work should be done by an electrician.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker panel or fuse box before installing or servicing.

WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values.

1.Open door by depressing LATCH BUTTONS into door and lifting. (Fig. 1)

LATCH

Fig. 1

BUTTONS

 

2.Remove DOOR while it is at a 20° - 30° angle to the housing. This will allow the door to slide over and forward from the hinges. (Fig. 2)

DOOR Ascent/Strut Fixtures

Fig. 2

3.Disconnect PRIMARY QUICK-DISCONNECT by grabbing sides and pulling away from fixture. (Fig. 3)

PRIMARY

QUICK

DISCONNECT

FUSES

Sheet 1 of 54/26/04 IMI-572Fig. 1STARTER

Fig. 3

NOTE: Fusing and the cube starter are accessible from the bottom, exposed side of the POWER TRAY. They may be serviced without opening the POWER TRAY.

4.Hold POWER TRAY HANDLE and press POWER TRAY

LATCH away from the power tray. Hinge power tray up and lift from fixture.

(Fig. 4)

Fig. 4

POWER TRAY

HANDLE

POWER TRAY

LATCH

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-572 AVU040062

Page 1
Image 1
Cooper Lighting IMI-572 installation instructions Installation Instructions, Sheet 1 of, Ascent/Strut Fixtures