TM
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
Ascent/Strut Fixtures
Sheet 3 of 5
4/26/04
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
7.Hook WALL BRACKET over WALL PLATE and place SUPPORT BRACKET into SUPPORT HOLES in WALL PLATE to support fixture as shown. (Fig. 7)
Make wire connections in WALL BRACKET.
Wire the fixture ground lead to the supply ground lead. Wire the fixture voltage lead to the supply voltage lead. Wire the fixture common lead to the supply common lead.
NOTE: To wire to circuits not having a neutral lead (such as 480V), connect the fixture voltage lead to one of the supply leads and the fixture common lead to the other supply lead.
Fig. 7
WALL
BRACKET
WALL PLATE
SUPPORT
BRACKET
SUPPORT
HOLES
8.Push SUPPORT BRACKET into WALL BRACKET and lower fixture until WALL BRACKET fits over WALL PLATE. Tighten
Fig. 8
WALL 
BRACKET
SOCKET
SCREW
NOTE: Ensure wires are not pinched while closing WALL BRACKET to WALL PLATE.
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
