TM
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
Ascent/Strut Fixtures
Sheet 5 of 5
4/26/04
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values.
12.To remove the REFLECTOR, disconnect the REFLECTOR CONNECTOR from the HOUSING. (Fig. 12)
Fig. 12
REFLECTOR
CONNECTOR
13.To reinstall, reverse steps 12 and 11, listening for audible clicks as REFLECTOR TABS engage REFLECTOR.
NOTE: This fixture is to be installed as a DOWNLIGHT ONLY. This fixture is not suitable for UPLIGHT mounting configurations.
NEMA TWIST LOCK PHOTOCONTROL & RECEPTACLE:
The photocontrol receptacle is factory installed and ordered with the fixture. The photocontrol is ordered separately and must be field installed. The voltage of the photocontrol must match the voltage of the fixture.
FUSING:
Single fuse is available for use with 120V, 277V or 347V fixture. Double fuse is available for use with 208V, 240V or 480V fixtures.
MAINTENANCE:
When maintenance is performed, check torque on all fasteners and tighten to specified torque if required.
CLEANING:
The reflector and door glass may be cleaned with any suitable,
detergent and rinsed with clean water. Please remove the reflector and door from the fixture prior to cleaning.
KEEP THIS DOCUMENT FOR FUTURE REFERENCEThese instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
