TM
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
Ascent/Strut Fixtures
Sheet 2 of 5
4/26/04
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values.
5.Using WALL PLATE as a template, drill (4) holes in wall. Install appropriate wall anchors (not supplied) and secure GASKET and WALL PLATE to wall with (4)
Fig. 5 | WALL |
PLATE |
GASKETLOCK
WASHERS
BOLTS
HOLES
BOX
NOTE: The SPACER, WALL BRACKET and associated components and hardware are shipped separately from the fixture.
6.Assemble WALL BRACKET to SPACER and HOUSING with
(2) BOLTS, (2) FLAT WASHERS, and (2) LOCK WASHERS by feeding BOLTS through holes in SPACER and into tapped holes in WALL BRACKET. (Fig. 6A & 6B)
Torque BOLTS as follows:
• (2) 1/2 - 13 (AEM) = 450 in/lbs OR
• (2) 5/16 - 18 (AES) = 130 in/lbs
WARNING
Risk of Personal Injury
Fixture may become damaged and/or unstable if not installed properly
Tighten all fixture components to their recommended torque values
BOLTS
LOCK
WASHERS
FLAT
WASHERS
Fig. 6B
SUPPORT
BRACKET
Fig. 6A
HOUSING
SPACER
WALL
BRACKET
WALL
BRACKET
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
