TM
INSTALLATION INSTRUCTIONS
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
Epic/Pole Mounted
Fixtures
Sheet 3 of 4
2/18/04
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
Vertically lamped
1.Loosen and remove ring retaining screws globe retaining ring and globe. Components are not tethered.
See Figure 5.
2.Remove two screws on ballast cover followed by ballast cover. See Figure 7.
3.Unplug optic
4.For starter replacement, remove the
For fuse replacement, unscrew fuse holder cap and replace fuse. Resecure fuse holder cap.
5.Plug optic
6.Resecure the ballast cover with the two screws.
7.Reinstall ring retaining screws securing globe retaining ring and globe. In the case of type 3 refractive glass globe, use the mark on globe bottom for orientation.
C. Power Pack ReplacementHorizontally lamped
1.Loosen two door screws.
2.Lower door to tethered resting position. See Figure 4.
3.Loosen thumbscrew until rectangular washer can be rotated 90 degrees. See Figure 6.
4.Rotate reflector faceplate to release from screws using key hole slots.
5.Unplug optic
6.Remove two screws on ballast cover followed by ballast cover. See Figure 7.
7.Unplug service
8.Holding the handle, loosen the two screws holding the power pack to the fixture housing. See Figure 8.
9.Holding the handle, rotate the power pack until free and lower.
10.Holding replacement power pack by handle, raise onto screw heads and rotate.
11.Tighten the two screws while holding power pack in position.
12.Plug together the service
13.Resecure the ballast cover with the two screws.
14.Reconnect optic
15.Raise door and secure with screws.
Fig. 4b | Options |
| FG, FR, SG & FRS |
Tether
Door Screws
Option MARing Retaining Screws
Globe Retaining Ring
Fig. 5a | Globe |
Ring Retaining Screws
Globe Retaining Ring
Fig. 5b | Globe |
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269