Manuals / Dell / Computer Equipment / Network Card

Dell AP-175, W- AP92, W-AP105, W-AP93 3 AP-93 TEL Placement, Aruba AP-92 Tel placement bottom view

Models: W-AP105 AP-105 AP-175 W-AP175 AP-93 W- AP92 W-AP93 AP-92

1 45

Download 45 pages 52.12 Kb

Page 19

Figure 9 - Aruba AP-92 Tel placement bottom view

3.2.3 AP-93 TEL Placement

This section displays all the TEL locations of the Aruba AP-93. The AP-93 requires a minimum of 3 TELs to be applied as follows:

3.2.3.1To detect access to restricted ports:

1.Spanning the serial port

3.2.3.2To detect opening of the chassis cover:

2.Spanning the bottom and top chassis covers on the left side

3.Spanning the bottom and top chassis covers on the right side Following is the TEL placement for the AP-93:

Figure 10 - Aruba AP-93 Tel placement front view

19

Image 19

Dell AP-175, W- AP92, W-AP105, W-AP93, W-AP175, AP-105 manual 3 AP-93 TEL Placement, Aruba AP-92 Tel placement bottom view

Contents

Version Feb Aruba Networks Crossman Ave Sunnyvale, CA Page Security Levels Physical Security Aruba Dell Relationship Acronyms and AbbreviationsAP-105 Series AP-175 Series ROLES, Authentication and Services Aruba Dell Relationship IntroductionAcronyms and Abbreviations IPSec GHz Aruba Part Number Dell Corresponding Part Number Product OverviewAP-92 Physical Description PWR AP-92 Indicator LEDs Label Function Action StatusEnet Label Function Action Status AP-93 AP-93 Indicator LEDs Label Function Action Status AP-105 Series AP-105 Wireless Access Point AP-105 Indicator LEDs Label Function Action Status AP-175 Series AP-175 Wireless Access Point Physical Description Function Action Status Position AP-175 Indicator LEDs Label Applying TELs Module ObjectivesSecurity Levels Physical Security AP-92 Tel placement front view 2 AP-92 TEL Placement Aruba AP-92 Tel placement right view Aruba AP-92 Tel placement bottom view 3 AP-93 TEL Placement Aruba AP-93 Tel placement left view Aruba AP-93 Tel placement top view 4 AP-105 TEL Placement Aruba AP-105 Tel placement left view Aruba AP-105 Tel placement bottom view 5 AP-175 TEL Placement Aruba AP-175 Tel placement back view Aruba AP-175 Tel placement top view Inspection/Testing of Physical Security Mechanisms Modes of Operation Configuring Remote AP Fips Mode Enable Fips mode on the AP. This accomplished by going to Configuring Remote Mesh Portal Fips Mode Configuring Remote Mesh Point Fips Mode Operational Environment Verify that the module is in Fips mode Fips 140-2 Logical Interfaces Module Physical Interface Logical Interfaces Crypto Officer Authentication Roles, Authentication and ServicesRoles Authentication Mechanism Strength User AuthenticationWireless Client Authentication Strength of Authentication Mechanisms WPA2-PSK KEK ServicesCrypto Officer Services WPA2 PSK Eapol MIC User ServicesPMK PTK Unauthenticated Services Wireless Client Services ∙ FTP ∙ Tftp ∙ NTP Non-FIPS Approved Algorithms Cryptographic Algorithms Hmac Critical Security Parameters RNG AES-CCM PSK GTK GMK Self Tests For an AES Atheros hardware Post failure