Dell W- AP92, W-AP105, AP-175, AP-93 AP-92 Indicator LEDs Label Function Action Status, Pwr, Enet

The exact firmware versions tested were:

∙ArubaOS_6xx_6.1.2.3-FIPS

∙Dell_PCW_6xx_6.1.2.3-FIPS

2.1.1.1Dimensions/Weight

The AP has the following physical dimensions:

∙120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")

∙255 g (9 oz)

2.1.1.2Interfaces

The module provides the following network interfaces:

∙1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX

∙Antenna

o2x RP-SMA antenna interfaces (supports up to 2x2 MIMO with spatial diversity)

∙1 x RJ-45 console interface

The module provides the following power interfaces:

∙48 V DC 802.3af power over Ethernet

∙12 V DC for external AC supplied power (adapter sold separately)

2.1.1.3Indicator LEDs

There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:

Table 2- AP-92 Indicator LEDs

Label	Function	Action	Status
PWR	AP power / ready status	Off	No power to AP
		Red	Initial power-up condition
		Flashing – Green	Device booting, not ready
		On – Green	Device ready
ENET	Ethernet Network Link	Off	Ethernet link unavailable
	Status / Activity
		On – Amber	10/100Mbs	Ethernet	link
			negotiated
		On – Green	1000Mbs Ethernet link negotiated
		Flashing	Ethernet link activity
11b/g/n	2.4GHz Radio Status	Off	2.4GHz radio disabled
		On – Amber	2.4GHz radio enabled in WLAN
			mode

8