Manuals / Dell / Computer Equipment / Network Card

Dell W-AP93, W- AP92, W-AP105, AP-92 4 AP-105 TEL Placement, Aruba AP-93 Tel placement top view

Models: W-AP105 AP-105 AP-175 W-AP175 AP-93 W- AP92 W-AP93 AP-92

1 45

Download 45 pages 52.12 Kb

Page 21

Figure 14 - Aruba AP-93 Tel placement top view

3.2.4 AP-105 TEL Placement

This section displays all the TEL locations of the Aruba AP-105. The AP-105 requires a minimum of 3 TELs to be applied as follows:

3.2.4.1To detect opening of the chassis cover:

1.Spanning the bottom and top chassis covers on the left side

2.Spanning the bottom and top chassis covers on the right side

3.2.4.2To detect access to restricted ports:

3.Spanning the serial port

Following is the TEL placement for the AP-105:

Figure 15 - Aruba AP-105 Tel placement front view

21

Image 21

Dell W-AP93, W- AP92, W-AP105, AP-92, AP-175, W-AP175 manual 4 AP-105 TEL Placement, Aruba AP-93 Tel placement top view

Contents

Version Feb Aruba Networks Crossman Ave Sunnyvale, CA Page AP-105 Series Aruba Dell Relationship Acronyms and AbbreviationsAP-175 Series Security Levels Physical Security ROLES, Authentication and Services Introduction Aruba Dell RelationshipAcronyms and Abbreviations IPSec GHz AP-92 Product OverviewPhysical Description Aruba Part Number Dell Corresponding Part Number AP-92 Indicator LEDs Label Function Action Status PWREnet Label Function Action Status AP-93 AP-93 Indicator LEDs Label Function Action Status AP-105 Series AP-105 Wireless Access Point AP-105 Indicator LEDs Label Function Action Status AP-175 Series AP-175 Wireless Access Point Physical Description Function Action Status Position AP-175 Indicator LEDs Label Security Levels Module ObjectivesPhysical Security Applying TELs AP-92 Tel placement front view 2 AP-92 TEL Placement Aruba AP-92 Tel placement right view Aruba AP-92 Tel placement bottom view 3 AP-93 TEL Placement Aruba AP-93 Tel placement left view Aruba AP-93 Tel placement top view 4 AP-105 TEL Placement Aruba AP-105 Tel placement left view Aruba AP-105 Tel placement bottom view 5 AP-175 TEL Placement Aruba AP-175 Tel placement back view Aruba AP-175 Tel placement top view Inspection/Testing of Physical Security Mechanisms Modes of Operation Configuring Remote AP Fips Mode Enable Fips mode on the AP. This accomplished by going to Configuring Remote Mesh Portal Fips Mode Configuring Remote Mesh Point Fips Mode Operational Environment Verify that the module is in Fips mode Fips 140-2 Logical Interfaces Module Physical Interface Logical Interfaces Roles, Authentication and Services Crypto Officer AuthenticationRoles Wireless Client Authentication User AuthenticationStrength of Authentication Mechanisms Authentication Mechanism Strength WPA2-PSK Crypto Officer Services ServicesWPA2 PSK KEK PMK User ServicesPTK Eapol MIC Unauthenticated Services Wireless Client Services ∙ FTP ∙ Tftp ∙ NTP Non-FIPS Approved Algorithms Cryptographic Algorithms Hmac Critical Security Parameters RNG AES-CCM PSK GTK GMK Self Tests For an AES Atheros hardware Post failure