Countertop Icemaker IMD Series Installation Manual

WATER LEVEL CONTROL

HOW WATER LEVEL CONTROL WORKS

When water is introduced through the inlet fitting the float rises. The float pushes against a lever which in turn forces the poppet assembly against the inlet fitting valve seat which seals the water off, (see FIG- URE 4). Before the water inlet is sealed the safety switch is operated. In the event of a water failure the float would drop down and operate the safety switch to shut off the machine.

If water level control will not shut off and seal at level as indicated, be sure inlet pressure does not exceed recommended factory operating range.

Under ordinary circumstances adjustment should not be necessary providing it was properly adjusted when unit was installed or relocated. If, however, the control becomes inoperative, repair or replace. See Start-Up Adjustment.

PURPOSE OF WATER LEVEL CONTROL

1.To automatically maintain proper water level in the evaporator when unit is running and making ice.

2.A safety switch is operated in the event of an interruption in water supply. The switch shuts off the electrical power to the icemaker and its refrigeration system. Switch will reset as soon as cause of water failure has been corrected and proper water level in icemaker has again been reached.

3.The transparent bowl not only provides a visible check of water level, but also is a good guide to the internal conditions which exist within the icemaker assembly itself. (See Cleaning Procedure).

TO REPLACE WATER LEVEL CONTROL

1.Shut off the water supply. Shut off the main power switch or unplug the ice dispenser from electrical outlet.

2.Remove the flexible tubing from bottom of water level control and drain water from water level con- trol and evaporator.

3.Remove flexible tubing at bottom of water level bowl connected to the overflow.

4.Hold water inlet fitting with proper tool to prevent it from rotating when disconnecting the water inlet.

5.Remove wing nut holding water control to its mounting bracket. Control can be removed by lifting straight up.

TO REPLACE WATER LEVEL SAFETY SWITCH

1.Shut off main power switch or unplug the ice dispenser from electrical outlet.

2.Unplug molex connector connecting switch to electrical box.

3.Remove the 2 screws anchoring the water level safety switch to the bottom of the water level control mounting bracket.

ICE LEVEL CONTROL

The ice level control assembly is secured to the top of the ice storage container cover. The cover is secured to the storage container with four screws. The level control switch is operated by a plate assem- bly located beneath the diaphragm. When the plate assembly is down due to lack of ice in storage con- tainer, electrical impulse is sent to compressor, starting the ice making cycle. As ice level increases in storage container, the plate assembly is pushed up. When storage container is full, it de-actuates the switch, stopping the compressor and ice making cycle.

© 2004-2009, IMI Cornelius Inc.

- 9 -

Publication Number: 638085277INS

Page 12 Page 14
Page 13
Image 13
Cornelius IMD Series installation manual Water Level Control
Page 12 Page 14

IMD Series specifications

The Cornelius IMD (Intelligent Dispensing) Series represents a cutting-edge advancement in beverage dispensing technology, making it ideal for a wide array of establishments, including restaurants, cafeterias, and bars. This innovative series is designed to provide ultimate flexibility in drink variety while enhancing efficiency and reducing operational costs.

One of the standout features of the Cornelius IMD Series is its advanced touchscreen interface. This user-friendly screen allows operators to navigate through beverage selections easily. Customizable menus enable businesses to showcase their unique drink offerings prominently. The interface can also be programmed to highlight promotions or new items, ensuring customers are always informed about their options.

In addition to the intuitive interface, the Cornelius IMD Series employs state-of-the-art digital metering technology. This ensures precise control of beverage portions, drastically reducing waste and ensuring consistent drink quality. The technology also allows for real-time tracking of beverage usage, providing valuable insights into inventory management and helping operators understand consumer preferences.

Another important characteristic of the IMD Series is its modular design. This allows operators to configure the unit to suit their specific needs, accommodating everything from carbonated beverages to cold brew coffee and even specialty cocktails. The modular nature also means that upgrades and maintenance can be performed with minimal disruption, keeping downtime to a minimum.

The Cornelius IMD Series is built with energy-efficient components, which is increasingly important in today’s environmentally conscious market. Its design minimizes energy consumption without sacrificing performance, supporting the push for more sustainable business practices.

Furthermore, the IMD Series integrates seamlessly with various payment systems, including cashless options, making transactions smooth and efficient. This integration not only enhances the customer experience but also streamlines the payment process for operators, improving overall service speed.

In conclusion, the Cornelius IMD Series is a versatile beverage dispensing solution that combines innovation, efficiency, and user-friendly design. With its advanced touchscreen interface, precise digital metering, modular construction, energy-efficient operation, and payment integration capabilities, it is poised to revolutionize how beverages are dispensed in various settings, meeting the demands of modern consumers and businesses alike.
Top Page Image Contents