Technical Information
Technical Information
This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could alter operation of your system.
Noise
Electrical pulse noise is present in most homes at one time or another. This noise in most intense during electrical storms. Certain kinds of electrical equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio frequencies are susceptible to these noise pulses, you may occasionally hear them in your HANDSET. Generally they are a minor annoyance and should not be interpreted as a defect in your system.
Range
Because radio frequency is used, location of the BASE UNIT can affect operating range. Try several locations in your home or office and pick the one that gives you the clearest signal to the HANDSET.
Interference
Electronic circuits activate a relay to connect the cordless telephone to your telephone line. These electronic circuits operate in the radio frequency spectrum. While several protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals enter the BASE UNIT. You may hear clicks or hear the relay activate while your are not using the HANDSET. If interference occurs frequently, it can be mini- mized or eliminated by lowering the height of your BASE UNIT ANTENNA or by relocating the BASE UNIT. You can check for interference before selecting the final BASE UNIT loca- tion by plugging in the phone.
NOTICE:
This cordless telephone uses radio communication between the HANDSET and the BASE UNIT and may not ensure privacy of communication. Other devices, including other cordless telephones, may interference with the operation of this cordless telephone or cause noise during operation. Units not containing coded access may be accessed by other radio communication systems. Cordless telephones must not cause interference to any licensed radio service.
IMPORTANT
When you hear interference, press the DEL /DEL button to charge the operating channel.
HANDSET Controls
1. HANDSET ANTENNA
2. NEW CALL/MSG(MESSAGE )WAITING LED Indicator: Blinks when recording a new incoming call or when receiving a Message Waiting signal, if you have subscribed to a Voice Mail Message service from your local telephone company. (See page 11 ).
3.Large LCD Screen: Shows call information, phone status, prompts and directory items.
4.TALK 
Button: Press to answer an incoming call or to place a call. Press to end a call.
5.TEMPORARY TONE 
Button: Press to temporarily change the dialing mode from PULSE to TONE for rotary service users . (Press once before entering numbers to
access the Answering System or Electronic Banking services, etc.)
6.DIR button: Press to access names and numbers stored in the DIRECTORY.
7.FUNC(FUNCTION)/VOICE MAIL 
/VOICE MAIL Button: (FUNCTION)- Press and hold down to access special functions operation in STANDBY mode. (For special
functions see page 19). (VOICE MAIL) - Press to automatically dial the Voice Mail Post Code in your area to access your Voice Mail Message. (Format)
8.
/FLASH Button: (FLASH) Press to answer a call if you have Call Waiting. (EDIT) Press to edit listed items.
9.BATT LOW INDICATOR :Appears on the LCD Screen when the battery charge is low. (See page 26 for detail)
10.
Button: Press to move around on the Large LCD Screen.
11.HANDSET Volume Control(Hi, Mid, Low) Switch: Select the receiver volume level (HI, MID, LOW).
12.HEADSET JACK: Insert Headset plug into the Headset Jack to enjoy
13.TELEPHONE KEYPAD: Allows you to make a call depending on pressed button. (for TELEPHONE KEYPAD characters, see page 24.)
14.SAVE RE/PA Button: (SAVE )Press and hold down to save the changes on the listed items. (REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a
pause while dialing. (You will need the SAVE RE/PA button to dial numbers which use an alternative Long Distance Access Code.)
15.DEL /SCAN button: (SCAN) Press to change the operating channel when you hear interference. (DELETE) press and hold down to delete items or individual characters.
16.CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
29 | D |
