Contents |
|
Safety Instructions | 3 |
Getting Started | 5 |
Cordless Telephone Operation | 8 |
Preparing for Use | 8 |
Receiving Calls | 8 |
Placing Calls | 9 |
Using the Headset Feature | 10 |
Redial Feature | 10 |
Caller ID System Operation | 11 |
Caller ID System | 11 |
Viewing Caller Information During Incoming Calls | 11 |
Message Waiting | 11 |
Call Waiting | 12 |
Voice Mail Function | 12 |
Call Forward | 12 |
Long Distance Call | 12 |
Caller List | 12 |
Viewing the Caller List | 13 |
Placing a Call from the Caller List | 13 |
Saving the Name and Number in the Caller List into the Phone Book | 13 |
Deleting All Records in the Caller list | 14 |
Selective Deleting in the Caller List | 14 |
Phone Book | 14 |
Viewing the Phone Book | 14 |
Recharging the Battery Pack
Battery Type
Use the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK 3.6V, 600mAh
NOTE: During a power interruption, the BASE UNIT does
not operate, and a phone conversation cannot be
made on the HANDSET.
Recharging the Battery Pack
The nickel metal
When the BATT LOW symbol appears on the LCD screen , a "beep" sound will be heard every 10 seconds. This indicates that the BATTERY PACK needs to be recharged.
Charge the BATTERY PACK at least once every 90 days of
The BATTERY PACK used in your telephone may develop a condition known as "MEMORY". Once subjected to a regular short discharging routine, the BATTERY PACK assumes the discharging pattern it was subjected to. This causes rapid discharging thereby shortening the BATTERY PACK charge span. If you believe your BATTERY PACK has developed a "MEMORY "condition, do not charge the HANDSET until the BATT LOW symbol appears on the LCD Screen. When the BATT LOW symbol appears on the LCD Screen, charge the HANDSET fully for 12 hours.
.
IMPORTANT
In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use.
1 | 26 |
