INSTALLATION PREPARATION
IMPORTANT NOTE: Read and comprehend all instructions in this manual before beginning installation. Failure to follow these installation instructions may result in a fire hazard, may result in personal injury, voids the warranty, and may affect a homeowner’s insurance policy.
CLEANING
The Inglenook fireplace requires advanced preparation before installation of a gas log set is completed. The amount of preparation time will depend greatly on whether the Inglenook fireplace has been in use (and for how long) or whether this is a new installation. If the Inglenook has been in use, it will necessary to contract with a professional cleaning service, such as a chimney sweep. Professional cleaning will be required both of the Inglenook’s firebox and the chimney system. Once cleaning is complete, perform a system check. This system check should ensure the damper is operating freely and properly and that the combustion air vent has no blockage allowing free airflow into the combustion chamber.
NEW INSTALLATION
For first time Inglenook fireplace installations, complete ALL installation instructions contained in the installation, operation, and maintenance manual that was provided with the Inglenook fireplace before beginning installation of the Inglenook gas log set. Failure to adhere to all installation requirements for an Inglenook solid fuel fireplace can create installation or operational problems when converting or operating the Inglenook gas log system. Contact a local authorized dealer or Country Flame to resolve any confusion or issues associated with installation. To maintain a valid Country Flame warranty, the use of a certified installer is required.
Once installation of the Inglenook solid fuel fireplace is complete, the installer can begin installation of the Inglenook gas log kit. The following pages take the installer through systematic requirements of this gas log installation procedure. In the event there is any confusion or questions, please contact a local authorized dealer or Country Flame direct.
Version 1.0b | 6 |