INGLENOOK PARTS REMOVAL

Once cleaning or installation of the Inglenook solid fuel fireplace is complete, it is time to remove some parts that will not be required for gas operation. FIGURE 1 identifies each of these parts and TABLE 1 lists each of these parts along with the Country Flame Part Number. Use TABLE 1 as a check sheet when removing these parts. Once removed, the wood burning parts need to be properly packed and stored away for potential future use. The homeowner should ensure proper storage of the Inglenook solid fuel parts. Future conversion of the Inglenook gas log system back to a solid wood fuel system will require the use of these parts. If the parts are lost, damaged, or worn, contact Country Flame or an authorized dealer to obtain new parts before attempting wood burning operations in the Inglenook fireplace again.

FIGURE 1: INGLENOOK SOLID FUEL PARTS REMOVAL

TABLE 1 should be used as a checklist to ensure all solid (wood burning) fuel parts are removed. Once removed, these parts should be stored for potential future conversion from gas logs back to solid wood burning fuel.

 

FIGURE 1 ITEM

PART DESCRIPTON

PART NUMBER

REMOVED

 

(1)

Log Retainer

IN-201

 

 

(1)

¼ by 20 by ½ Security Bolt

PP-1225

 

 

(1)

¼ by 20 by ½ Security Bolt

PP-1225

 

 

(2)

Starter Air Intake Assembly

IN-54

 

 

(2)

¼ by 20 by ½ Bolt HHCS

PP-766

 

 

(2)

¼ by 20 by ½ Bolt HHCS

PP-766

 

 

(3)

Ash Grate

IN-47

 

 

(4)

Bottom Fire Brick #X1, 4 each

PP-868

 

 

(4)

Bottom Fire Brick #X2, 2 each

IN-202

 

 

(4)

Bottom Fire Brick #X3, 2 each

IN-203

 

 

(4)

Bottom Fire Brick #X4, 2 each

IN-204

 

 

(5)

Ash Pan Box

IN-93

 

 

(5)

Ash Pan Handle

PP-1192

 

 

(6)

Ash Pan Compartment Side Plate

IN-72

 

 

(6)

#8 by 32 by 3/8 TEK SMS, 4 each

PP-159

 

 

(7)

Gas Line Knock Out (left side)

disposable

 

 

 

 

 

 

 

 

 

 

 

 

TABLE 1:

INGLENOOK SOLID FUEL

PARTS REMOVAL

 

Version 1.0b

7