FILTER REPLACEMENT
Make sure to pull power plug out prior to filter cleaning.
Replacing the Deodorant filter (Every 12 Months)
�Open front cover, separate filter case out of the product and take Deodorant
filter out of filter case.
�
�Remove vinyl packing of new filter, Put
Deodorant filter into the filter case. |
|
Assemble filter case |
|
into the product in |
|
reverse of separation, |
|
and closefront cover. | � |
Filter Orders Pre- � medium � HEPA � Ag allergy shield � Deodorant
Cleaning and replacement schedule
Filters | Replacement | Cleaning |
|
|
|
Pre- | Every 2~4 Weeks | Cleaning |
Medium | Every 4 Months | Replacement |
HEPA | Every 12 Months | Replacement |
Ag Allergy Shield | Every 6 Months | Replacement |
Deodorant | Every12 Months | Replacement |
|
|
|
※based on 24 hours/1 day automatic operation.
23
INSTALLATION METHOD
Contact A/S center to install the product on the wall.
Installation on the wall method
Fitting method
Install using
from wall and ceiling right and left as shown in the picture. - When the product is used on the wall, it may contaminate
wall or ceiling.
- Be careful not to drop front cover and filter case down during maintenance or filter change.
- Do not pull power cord.
Make sure the product is installed strongly on the screw of wall- mounted panel.
Hanger (1 ea)
screw (6 ea) | anchor (6 ea) | rubber foot (2 ea) |
�Determine the place on which the product is going to be installed. Make a hole to install
hanger using a nail |
|
and put an anchor in. | � |
Place hanger on it | |
and fix it on the wall |
|
using screw. |
|
�Place rubber foot on the 2 ea of round projection on the lower part of the back side of the product.
24
Safety Information Operating Instructions Troubleshooting Tips Customer Service