Preparations, Filter installation, Filter case hook

PREPARATIONS

-Please remove packing vinyl before installation.

- Make sure to use only in indoor and separate plug from outlet when the product is not used.

-Check front side of filter.

▶Filter order : pre- filter→medium filter→HEPA filter→Ag allergy shield filter→Deodorant filter

�Open front cover and take

�Place filter case on the floor, remove packing for each filter and put them in the case in reverse according to filter steps.

Check filters front side during filter installation.

In case of Ag allergy shield filter, place the filter in its own case with black side front and put it in the filter case.

�To install pre- filter, place pre- filter at

the 6 hooks of filter case correctly with FRONT mark front.

�Place the lower part of filter case first
and push the upper part of the case in.
Install front cover into the
product and close it.	�
	�
Remote controller preparations
●Open remote controller pushing	①	②
down the rear part and pushing	①	②
down the rear part and pushing
down the battery cover, and
place AAA size battery setting
positive and negative pole.

Safety Information Operating Instructions Troubleshooting

Deodorant filter

Medium filter

�

Ag allergy shield filter

�

HEPA filter

Close the cover pushing up the

cover.

During using of remote controller

- If remote controller does not work, check if life-time of battery is over due.

-Use the same size of two AAA batteries to change them.

-Take the batteries out if the remote controller is not used for a long time.

- The life-time of batteries may be differing from the frequency of remote controller.

How to use remote controller

-use remote controller facing the receiving part of the product.

-The remote controller can not work if there is any obstacle between the controller and the product.

-Do not impact remote controller.

-Do not keep the controller in a wet place or direct rays of the sun, and near heat of fire.

Tips Customer Service