Filter Cleaning Method, Cleaning the front cover

CLEANING METHOD

●Remove the front cover from the unit and use a dry cloth or soft brush to dust it off.

Use a wet cloth if necessary but do not use a polisher.

Cleaning the lens on the back of the front cover (Every 2 Months)

●Remove the front cover from the unit and

use a dry cloth, soft brush, or cotton swab to dust off the mood light on the back of the cover.

Use a wet cloth if necessary but do not use a polisher.

●Use a dry and soft cloth to clean the unit.

Use a wet cloth if necessary but do not use a polisher.

FILTER CLEANING METHOD

-Make sure to take power plug out prior to filter cleaning.

- Pre- filter can be recycled by dust removal or water washing.

-If pre-filter cleaning is not done for a long time, it may cause slow down of performance of the product.

-Medium filter, HEPA filter, Ag allergy shield filter, Deodorant filter can not be recycled by washing. Washing can damage filters.

�Lift to separate body pulling the lower part of front cover.

�Pull pre- filter handle to take it out.

�Remove dust with vacuum cleaner or water according to pollution level.

�Dry well pre- filter to before installing in the filter case, and push to the end of the product. Install front cover in the product again.

Safety Information Operating Instructions Troubleshooting Tips Customer Service