INSTALLATION METHOD
Installation on the wall method
�Separate base by pulling out screw
on the lower part of the back side.
BEFORE ASKING A/S
Please check the followings before request for A/S.
Please check out the following information before contacting Customer Service. The unit might not operate properly due to a lack of knowledge about the unit. If the problem still remains despite referring to this guide, then please call the customer service center.
Symptom | Check | Remedy |
� 
| �Install the product in the hanger. | Make sure to check after |
| Make sure that hanger fits in the | installation! |
| � Is power plug connected? |
| No wind blows | � Is display parts are all off? |
out. |
|
| � Check if it is not a power failure. |
Voltage rating that matches it on the rating plate.
Press operation/stop button and select desired function.
Use the product after power is on.hanger rack on the back side of the |
product completely. |
| No wind change | � Is in manual operation? | Set the product at the |
| in automatic/ |
| desired operation mode. |
| infant / rhythmical | � Is the room dark? | Wind fixed to the latest |
| operation. |
| during night silent operation. |
� ( O )
�Is there dust on the nearby sensor lens?
�Is dust purity level keeps showing high?
�Is dust purity level keeps showing high?
Page 17
Page 17
Hanger
| Wind volume is | � Is filter cleaning and change time | Install correctly. Check |
| very weak. It | overdue? | to clean or change the Page 20~23 |
| smells from |
| filters. |
| ventilator. |
| |
|
|
( X )
�Check installation and install filter and front cover on the product.
�Check the batteries.
�Check if the batteries are fitted in correctly (positive, negative)?
�Does the room light twinkles?
�Is there any electronic goods near the product?
Check positive and
negative pole of the Page 14 batteries.Change fluorescent light or move the product.Keep the product away from electronic goods more than 2 m.
Customer Service
25
26
