03
04
●Do not use a damaged power cord or plug, and if the plug cannot be inserted securely into
an outlet, please make the necessary adjustments for the purpose of avoiding fire or shock hazards. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid danger.
●Always unplug the water filtration system
before moving it, cleaning it, repairing it, or replacing the filter. Also, close the main feed water valve during periods that the product is not in use.
● Periodically remove dust from the power plug with a dry cloth. Dust
WARNING
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Installation & Safe Use
●Keep the water filtration system away from
humid places and direct sunlight in order to avoid electric shock and fire.
●Connect the water filtration system to your
cold water pipe only. | Cold Water Pipe | |
Note | The feed water that’s over 40 degrees | |
| could cause damage to the filters. |
|
● Do not install the water filtration system in a location where it could cause water to freeze. Damage from freezing is not covered by the warranty.
●If the water pressure at one’s house is
over the maximum working pressure of the water filtration system (referring to the rating plate), install a
● Periodic filter replacement is required for assuring that clean water is emitted. If filters are overused, the performance of the filters deteriorates. Therefore, be sure to replace the filters in a timely manner.
● Please drain the water for a period of four minutes or more if you have not used it for a long time.
●Do not repair, disassemble, or modify the unit.
Fire and/or electrical shock may occur as a result. For repair, contact your
dealer of purchase or
Safety Information |