Installation Instructions
C3 Preparing for the bottom Trim Installation
a.With oven installed, take the bottom trim and center it on the bottom front edge of
the cabinet opening.
D ReplacingDoor the Oven
The oven door is heavy. You may need help lifting the door high enough to
b.Using the trim as a template mark the center of each slot (three total) where the mounting holes will be drilled.
With Lower Trim
In Position
Mark (3) Mounting
Hole Locations
Remove Lower Trim
Before Pre Drilling
Mounting Holes
slide it into the hinges slots. Do not lift the door by the handle.
Replacing the Oven Door
D1 | Pick the Oven Door up by |
placing one hand on each |
side. The door is heavy so
c.Remove the trim.
d.Drill pilot holes into the center of each template mark.
you may need help. Do not lift the door by the handle.
C4 InstallingTrim the Bottom
a. Place the bottom trim centered over the
Side
D2 | Place the notch of the |
hinge arm into the |
bottom edge of the hinge slot.
D3 Open the oven door as
far as it will open.
D4 | Push the hinge locks |
up against the front |
Bottom Edge Hinge Arm Of Slot
Hinge Notch
Hinge in
Locked Position
Trim
Trim
frame of the oven
Screw
Side
Trim
Lower
Trim
b.Using the three pan head trim screws provided secure the bottom trim to the bottom edge of the cabinet.
IMPORTANT: If this unit is ever removed from the cabinet or the cavity is ever pulled out for service, the trim must be removed first or damage to the trim will occur.
cavity, to the locked position.
D5 Close the oven door. | Notch of |
| Hinge Securely |
| Fitted into Bottom |
| of Hinge Slot |
9
