Step3
•Locate BLACK supply tube from power unit and BLACK supply tube from misting nozzle assembly.
•Remove protective caps from the BLACK
supply tube and filter attached to the BLACK tube.
•Connect BLACK supply tube from misting arm assembly to the filter installed on the BLACK supply tube from the power unit.
Continue to push supply tube over the barb on the filter until it rests against the filter body.
NOTE: The supply tube may be difficult to assembly to the filter body. Wiping the barb with water may facilitate assembly.
•Locate BLUE supply tube from power unit and BLUE supply tube from misting arm assembly.
•Remove protective caps from the BLUE
supply tube and filter attached to the BLUE tube.
•Connect BLUE supply tube from misting arm assembly to the filter installed on the BLUE supply tube from the power unit.
Continue to push supply tube over the barb on the filter until it rests against the filter body.
Connecting Power Unit to Tractor
Electrical System
Step 1
•Look on the dash of your tractor and deter- mine whether your tractor is equipped with a Maintenance Minder. If your tractor is not supplied with a Maintenance Minder, proceed to step 12.
Step 2
•From inside the engine compartment, locate the underside of the Maintenance Minder.
•Disconnect tractor electrical connector from Maintenance Minder.
10
