Craftsman 139.53677SRT1, 139.53671SRT1, 139.53674SRT, 139.53661SRT1 owner manual LockWashe 5/6

Please read and comply with the warnings and reinforcement instructions on page 24.

They apply to one-piece doors also.

•Center the bracket on the top of the door, in line with the header bracket as shown. Mark holes

•Ddl! 5/16" pilot holes and fasten the door bracket with hardware supplied,

If the door has no exposed framing, drill 3/16" pilot holes and fasten the bracket with 5/16=x1-I/2" lag screws (not provided) to the top of the door.

The door bracket may be installed on the top edge of the door if required for your installation. (Refer to the dotted line optional placement drawing.) Drill 3/16" pilot holes and substitute

5/16"x1-1/2" lag screws (not provided) to fasten the bracket to the door.

Hardware Shown Actual Size

©

I_.< _16"-18 LockWashe_ 5/_6"

5/1_'-1_t X 2-1/2 =

k

25