Craftsman 139.53674SRT, 139.53671SRT1, 139.53677SRT1 Accessories, For Sectional Doors Only

Accessories

Sears offers many useful accessories for your garage door opener.

Sears model numbers and descriptions.

	Emergency Key Release:	139.53681
	Required for a garage with NO
	access door. Enables homeowner
	to open garage door manually from
	outside by disengaging trolley.
		139.53680
139.53703	Outdoor Key Switch:
	Operates the garage door
	automatically from outside when
	i remote control is not handy.	139.53684
139.53704	8 Foot Rail Extension	•	I

To allowan 8 footdoor to openfu_

139.53705	10 Foot Rail Extension:	139.53686
	To allowa 10 footdoor to opan fu_.

53589 Support Brackets: 139.53709

For finished ceilings or where additional support is required, based on garage construction. Includes brackets and fastening hardware.

They are illustrated below with

SECURITY.Ik 3-FuncUon Remote Control:

Includes visor clip.

SECURITY+ Compact

3-Function Remote Control:

With loop for attaching key ring. (Available April, 1997)

SECURITY+ Keylees Entry:

Enables homeownerto operate garage door opener from outside by entering a password.Also can add a temporary passwordfor visitorsor service persons.This temporary passwordcan be limitedto a programmable number of hours or entries.

Plug-In Light Control:

Enables homeowner to turn on a lamp, television or other appliance from car, bedside, or anywhere in the home with a remote.

Door Clearance Brackets:

(For Sectional Doors Only)

Replaces top brackets and rollers on door to reduce height of door travel. For use when installing opener in garage with low headroom clearance.

		To Add the Keyless Entry
We recommend	that you program your password		If you do not have a Premium Control Console:
before you install the Keyless		Entry. You will not	1. Choose a 4-digit password using numbers from
need assistance,	and you can test the reception at		0 to 9 (a number can be used more than once, for
the mounting location before		installation.	example, 4, 0, 4, 1).
If you have a Premium Control Console:			2. Press the four buttons for the password, then press
			and hold the Enter button. The indicator light on
1. With the door closed, press the four digit password
			the door opener panel will blink.
desired, then press and hold Enter.
			3. Press and release the SRT (learn) button on the
2. Press and hold the light button on the door control.
			opener panel. After the opener light flashes,
3. Press and hold the door control pushbar.
			release the Enter button.

4. After the opener light flashes, release all buttons.	Test by pressing the password, then press Enter. The
	door should begin to move.