Craftsman 152.213361 operating instructions Shock

Models: 152.213361

1 40
Download 40 pages 20.6 Kb
Page 5
Image 5

THINSTOOL MUST BE GROUNDED WHmLE mNUSE

TO PROTECT THE OPERATOR FROM ELECTRmC

SHOCK.

mNTHE EVENT OF A MALFUNCTmON OR BREAK-

DOWN, grounding provides the path of bast resistance for eUectriccurrent and reduces the risk of eUectric

shock, This tooUis equipped with an eUectric cord that has an equipment-grounding conductor and a ground- ing pUug,The pUug MUST be pUugged into a matching eUectricaUreceptacle that is properUy installed and

grounded in accordance with ALL bcaU codes and ordinances,

DO NOT MODIFY THE PLUG PROVIDED, if it wHUnot fit the eUectrbaUreceptacb, have the proper eUectrbaU receptacle installed by a qualified electrician,

IMPROPER ELECTRICAL CONNECTION of the equip° ment-grounding conductor can result in risk of electric shock, The conductor with the green insulation (with or without yellow stripes) is the equipment-grounding conductor, DO NOT connect the equipment-grounding conductor to a live terminal if repair or replacement of the electric cord or plug is necessary,

CHECK with a qualified electrician or service personnel if you do not completely understand the grounding instructions, or if you are not sure the tool is properly grounded,

The motor supplied with your Dust Collector is a 120°volt, singb-phase motor, It is shipped wired for

120°volt application, Never connect the green wire to a live terminal, See OPERATING DUST COLLECTOR

section for directions on changing motor voltage,

USE ONLY A 3-WIRE EXTENSION CORD THAT HAS A 3-PRONG GROUNDING PLUG AND A 3-POLE RECEPTACLE THAT ACCEPTS THE TOOL'S PLUG.

REPLACE A DAMAGED OR WORN CORD IMMEDIATELY.

This tool is intended for use on a circuit that has an electrical receptacle as shown in FIGURE 1. FIGURE 1 shows a 3-wire electrical plug and electrical receptacle that has a grounding conductor. If a properly grounded electrical receptacle is not available, an adapter as shown in FIGURE 2 can be used to temporarily connect this plug to a 2-contact ungrounded receptacle. The adapter has a rigid lug extending from it that MUST be connected to a permanent earth ground, such as a

properly grounded receptacle box. THIS ADAPTER IS PROHIBITED IN CANADA.

CAUTION: In all cases, make certain the electrical

receptacle in question is properly grounded, If you are not sure have a certified electrician check the electrical

receptacle,

This Dust Collector is for indoor use only, Do not expose to rain or use in damp locations,

Fig. 1

 

 

Fig. 2

 

 

 

grounding

3-prong

 

 

adapter lug

 

 

 

electrical

 

 

 

receptacle

._

 

grounding

 

conductor

grounding

 

(}

 

 

conductor

 

 

3-wire electrical cord

 

2-prong

 

3-wire electrical cord

electrical receptacle

 

 

Page 5
Image 5
Craftsman 152.213361 operating instructions Shock