Hopper
Handle
ChipperChute
\
Chute
Deflector
ReductionChamber
J
Figure 2
Chipper Chute | Reduction Chamber |
Branches up to 2" in diameter may be fed into the chipper chute for chipping= See Figure 4=
Debris is shredded and reduced with the reduction chamber. See Figure 4.
Hopper
Leaves, twigs and branches up to
iMPORTANT: Never place branches with a diameter greater than 1/2dnch in the hopper, Doing so can result in serious damage to your unit'sshredder blade, flails or impeller,
HandJe
Use the handle when manually transporting the chipper shred- der. See Figure 4=
Chute Deflector
Chipped and shredded debris is discharged out the chute deflec- tor. The unit may be operated with or without the collection bag attached to the chute deflector. See Figure 4.
can result in foreign objects being thrown. Always
_kwearARNING:the safetyThe operationglasses providedof any chipperwith thisshredderunit or eye shields before chipping or shredding and while pedorming any adjustments or repairs.
Engine Controls
See the Briggs & Stratton Owner/Operator manual packed with your unit for the location and function of the controls on the engine=