IMPORTANT," This unit is shipped without gasoline or oil in the engine. After assembly, see OPERATION sec- tion of this manual for proper fuel and engine oil
This Chipper Shredder has been completely assembled at the factory, except for the debris collection bag, which is stowed in the chipper chute for shipping.
Removing Unit From Carton
1.Remove staples, break glue on top flaps or cut tape at carton end and peel along top flap to open carton.
2.Remove any loose parts.
3.Cut down along carton edges and lay carton down flat.
4.Remove packing material, if present. Lift unit from the rear and discard bottom pad, if present. Roll unit out of carton. Check carton thoroughly for loose
parts.
Loose Parts Jn Carton
a. One Debris Collection Bag
b. One Pair of Safety Glasses
c. One 20 oz. Bottle of Engine Oil
d. One Operator's Manual
Attaching The Debris
Collection Bag
2.To attach the bag:
a.Place the opening of the bag completely over the chute deflector.
b.Position the bag so that the wing knobs which secure the chute deflector to the impeller housing are completely covered.
c.Pull on the drawstrap until the bag is tight around chute deflector opening. See Figure 1.
\
Figure 1
6
