e To attach the bag, place the opening of the bag over the chute deflector so it completely covers the chute opening. Depress the plunger on the draw-
string, and pull on the drawstring until the bag is tight around the chute opening Release plunger to lock it into position, See figure 5,
OPERATION
KNOWYOURCHIPPER-SHREDDER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER Compare the illustrations with your chipper-shredder to familiarize yourself with the location of various controls and adjustments, Save this manual for future reference,
| Hopper |
| Assembly |
Oil Fill | Release |
Dipstick | Bar |
| Chipper |
| Chute |
Spark | Chute |
Plug \ | Deflector |
Choke | |
| Catcher |
Throttle | Bag |
Handle | |
FIGURE 6.
MEETSANSiSAFETYSTANDARDS
Sears chipper-shredders conform to the safety standards of the American National Standards Institute_
OPERATINGCONTROLS(See figure 6)
RELEASE BAR--Used to release the hopper when raising or lowering
CHOKE LEVER--Used to enrich the fuel mixture in the carburetor when starting a cold engine.
STARTER HANDLE--Usedto manually start the engine,
THROTTLE CONTROL--Controls engine speed and stops the engine.
BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE "SAFETY RULES" AS SHOWN ON PAGE 2 OF THIS MANUAL, ALWAYS BE CAREFUL.
The operation of any chipper-shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear the safety glasses pro- vided with the chipper-shredder or eye shields before chipping or shredding, or while performing any adjustments or repairs_ We recommend Wide Vision Safety Mask for over spectacles or standard glasses available at Sears Retail or Catalog Stores,
