2.Set the parking brake and push the vehicle. Ifthe rear wheels roll, adjust the brake following instructions on page 20.

Tires

_lb airARNING:pressure shownNeveronexceedsidewallmaximumofthetirelimit. of

The recommended operating tire pressure is 20-22 psi for both sets of tires. Refer to the tire sidewall for exact tire manufacturer'srecommendation. Do not ovednflate. Uneven tire pressure could cause the cutting deck to mow unevenly.

1.Remove throe screws holding the cup and battery holder to the frame of the unit.

2.Remove red and black insulation caps from battery terminals.

_r

!' //

l

1 \

Cable j

Battery

The battery is located under the cup holder to the right of the seat. The positive battery terminal is marked Pos.

(+). The negative battery terminal is marked Neg. (-).

_ relatedARNING:accessoriesBatterycontainposts,leadterminalsand leadand compounds. Wash hands after handling.

Always keep battery cables and terminals clean and free of corrosive build-up.

After cleaning, apply a light coat of petroleum jelly or grease to both terminals.

Always keep the rubber boot positioned over the positive terminal to prevent shorting.

If removing the battery for any reason, disconnect the NEGATIVE (black) wire from itsterminal first, followed by the POSITIVE (red) wire. When re- installing battery, always connect the POSITIVE (red) wire to its terminal first, followed by the

NEGATIVE (black) wire.

IMPORTANT:Be certain that wires are connected to the

correct terminals; reversing them could change poladty and cause damage to the engine'salternating system.

Check fluid level inside each cell of the battery every two weeks and before and after charging. Always maintain level just below the split rings.

Add only distilled water. Never add additional acid

or any other chemicals to the battery after initial activation.

NOTE: ff you have operated the tractor for a long

period, check the fluid level of the battery as it can overheat and lose fluid.

Connecting Battery Cables

To reconnect battery cables, if the battery was removed for some reason, follow instructions below.

Figure 16

3.Remove battery terminal screws with a Phillips screw driver or a 10 mm. socket wrench.

4.Attach the red battery cable to the positive terminal (marked +), and the black battery cable to the negative terminal (marked -) on the battery. See

Figure 16.

5.Align the cables with the slots in the battery cover and tighten the screws on the battery terminals. See Figure 16.

WARNING: Press the battery cables against

side of battery so that these do not make contact with flange of rider frame when it is opened or closed.

6.Re-install the battery cover and cup holder.

Cleaning the Equipment

1.Promptly wipe off any fuel or oil spilled on the machine with clean cloth.

2.Clean the underside of the blade housing after

each mowing. Do not let clippings or debits accumulate around the blade.

3.Using a brush or cloth, remove grass, chaff or debds from the finger guard on the engine daily to prevent overheating of the engine. Do not clean with a fomeful spray of water since water contaminates the fuel system.

4.Keep the governor linkage, springs and controls free of debris.

17

Page 17
Image 17
Craftsman 250, 270, 247 owner manual Tires, Battery, Cleaning the Equipment

270, 250, 247 specifications

The Craftsman 247,250,270 series of outdoor power equipment represents a robust lineup designed for both home gardening enthusiasts and professionals. These versatile machines offer a blend of durability, efficiency, and ease of use, making them invaluable for tackling various landscaping tasks.

One of the standout features of the Craftsman 247 series is its reliable engine performance. Powered by a strong, efficient engine, these machines deliver consistent power, whether you are mowing, trimming, or performing other gardening tasks. The engines are engineered for easier starting and smoother operation, reducing the frustration often associated with outdoor equipment.

The cutting technology employed in the 247 series deserves special mention. Many models come equipped with a precise cutting deck that boasts multiple height adjustments, allowing users to tailor the cutting height to suit different grass types and mowing conditions. This flexibility ensures a clean cut every time, promoting healthier lawn growth.

In terms of user comfort, the Craftsman 247,250,270 models incorporate ergonomic designs. The controls are intuitively placed, allowing for easy access while mowing. Additionally, features like adjustable handles and padded grips enhance overall user comfort, reducing fatigue during extended use.

Another notable characteristic of this series is its focus on durability. The materials used in the construction are selected for their resilience, ensuring that these machines can withstand the rigors of regular use. Steel decks and heavy-duty frames not only increase the longevity of the equipment but also provide stability during operation.

The Craftsman 247 series also incorporates modern technology to enhance usability. Some models feature electric start options, eliminating the hassle of manual pull-starts. Furthermore, the addition of innovative safety features such as automatic shut-off systems ensures that both the user and the machine remain safe during operation.

For those looking to tackle varied terrains, the 247 series offers machines with versatile wheel designs and traction capabilities. This allows for effective operation on both flat and uneven ground, making these models suitable for a variety of landscaping challenges.

In conclusion, the Craftsman 247,250,270 series is a robust solution tailored to meet the needs of gardeners and landscapers alike. With their powerful engines, user-friendly designs, and durable construction, these machines stand out as reliable workhorses in the outdoor power equipment market. Whether you are maintaining a pristine lawn or handling more extensive landscaping projects, these Craftsman models are equipped to deliver performance and efficiency.