Manuals / Craftsman / Lawn and Garden / Utility Vehicle

Craftsman 270, 247, 250 owner manual Deck Engagement, Adjusting Seat Position, Deck Levelling, Ciip

Models: 270 250 247

1 64
Download 64 pages 41.88 Kb
Page 18
Image 18

WARNING: Never attempt any adjustment while the engine is running, except where specified in the operator'smanual.

WARNING: For all other adjustments, disconnect the spark plug wire(s) and ground against the engine first. Then proceed with the adjustment.

Adjusting Seat Position

The seat position on the lawn utility vehicle can be adjusted to maximize the operator'sconvenience.

1.Stop the vehicle completely and engage the parking brake. Tum ignition off.

2.Pivot the seat up, as shown in Figure 17, to access seat hardware.

3.Using a 9/16" wrench or socket, loosen the four self-tapping screws on the bottom of the seat. See

Figure 17.

4.Slide the seat forward or backward in the slot, and position it as desired. Retighten the four screws.

4.Wearing a pair of heavy work gloves to prevent injury, rotate the cutting blade so that it is pointed side to side and perpendicular to the dder.

5.Measure the distance from each tip of the blade to the ground, If the distance from both blade tips to the ground is not the same, perform a side to side levelling of the deck.

6.For levelling, remove the hairpin clip and flat washer shown in Figure 18. Thread the ferrule in or out as required.

7.Check for correct adjustment. Repeat adjustment if necessary

8.Reattach the hairpin clip and flat washer to ferrule.

Deck Lift Lever-_._ _

--_-

== •i !1

 

Ciip_

_

-_-__I

/[ I

_ ---

i.,r

 

,, \W%,,,,,,,,,///

_-,-__.

Figure 18

Figure 17

Deck Levelling

1.In case of uneven mowing, check air pressure in all four tires and fill up if needed. Recommended air pressure is 20-22 psi. If this does not correct the problem, proceed with deck levelling.

IMPORTANT: Perform adjustments to the deck on a fiat, level surface.

2.Place the vehicle on a level surface. Depress and lock the parking brake. Disconnect the spark plug wire and ground it.

3.Place the deck in the lowest cutting position by sliding the deck lever to the appropriate position.

Deck Engagement

NOTE: The deck control cable is threaded at both ends; adjustment has to be made at the end that attaches to the control lever on the steering column.

1.Inspect the linkage and cable for damage through wear and tear.

2.To determine whether adjustment is necessary, perform the following test. The deck engagement cable is correctly adjusted when the upper deck drive belt has a maximum deflection of 0.5" in the engaged position. When disengaged, the blade brake should be firmly applied and the belt should not drag.

3.To adjust, loosen the jam nuts and back the cable out to tighten or thread inward to loosen. Use a 1/2" wrench for this purpose.

18

Page 17 Page 19
Page 18
Image 18
Craftsman 270, 247, 250 owner manual Deck Engagement, Adjusting Seat Position, Deck Levelling, Ciip
Page 17 Page 19

270, 250, 247 specifications

The Craftsman 247,250,270 series of outdoor power equipment represents a robust lineup designed for both home gardening enthusiasts and professionals. These versatile machines offer a blend of durability, efficiency, and ease of use, making them invaluable for tackling various landscaping tasks.

One of the standout features of the Craftsman 247 series is its reliable engine performance. Powered by a strong, efficient engine, these machines deliver consistent power, whether you are mowing, trimming, or performing other gardening tasks. The engines are engineered for easier starting and smoother operation, reducing the frustration often associated with outdoor equipment.

The cutting technology employed in the 247 series deserves special mention. Many models come equipped with a precise cutting deck that boasts multiple height adjustments, allowing users to tailor the cutting height to suit different grass types and mowing conditions. This flexibility ensures a clean cut every time, promoting healthier lawn growth.

In terms of user comfort, the Craftsman 247,250,270 models incorporate ergonomic designs. The controls are intuitively placed, allowing for easy access while mowing. Additionally, features like adjustable handles and padded grips enhance overall user comfort, reducing fatigue during extended use.

Another notable characteristic of this series is its focus on durability. The materials used in the construction are selected for their resilience, ensuring that these machines can withstand the rigors of regular use. Steel decks and heavy-duty frames not only increase the longevity of the equipment but also provide stability during operation.

The Craftsman 247 series also incorporates modern technology to enhance usability. Some models feature electric start options, eliminating the hassle of manual pull-starts. Furthermore, the addition of innovative safety features such as automatic shut-off systems ensures that both the user and the machine remain safe during operation.

For those looking to tackle varied terrains, the 247 series offers machines with versatile wheel designs and traction capabilities. This allows for effective operation on both flat and uneven ground, making these models suitable for a variety of landscaping challenges.

In conclusion, the Craftsman 247,250,270 series is a robust solution tailored to meet the needs of gardeners and landscapers alike. With their powerful engines, user-friendly designs, and durable construction, these machines stand out as reliable workhorses in the outdoor power equipment market. Whether you are maintaining a pristine lawn or handling more extensive landscaping projects, these Craftsman models are equipped to deliver performance and efficiency.