SETTING UP THE GROUND SPEED
CONTROL LEVERS
1.Loosen (do not remove) the hardware securing the ground speed control levers to the lever bases (see Figure 3).
2.Raise the levers, aligning the upper hole in each lever with the upper slotted hole in the lever base.
3.Install the hardware as shown in Figure 3. Tighten to
NOTE: Ground speed control levers must be adjusted prior to use. Refer to the "Ground Speed Control Adjustment" section.
_
(_ | (_ | |
|
| x |
Figure 3. Setting Up the Ground Speed Control Levers
12
