INSTALLING THE SIDE DISCHARGE
DEFLECTOR
NOTE: The deflector hinge (A, Figure 4) and bracket (B) come installed on the mower deck from the factory.
AWARNING
Installation of the side discharge deflector is required for proper and safe operation. Failure to install the side discharge deflector can result in injury or death.
Figure 4. Deflector Hinge and Bracket
A. Deflector Hinge
B.Bracket
1.Lay the deflector assembly (A, Figure 5) inside the deflector hinge (B) on the right side of the mower deck. Align the holes in the deflector with the holes in the hinge.
2.Insert the longer end of the torsion spring (C) through the slotted hole in the deflector.
3.Insert the hinge rod (D) through one end of the deflector assembly and hinge, through the torsion spring, and out through the other end of the deflector assembly and hinge.
NOTE: Make sure that the shorter end of the torsion spring (E) hooks into the notch of the deflector bracket
(F).
4.Firmly install one push nut (G) onto each side of the hinge rod.
Figure 5. Install Side Discharge Deflector Assembly
A.Deflector Assembly B. Deflector Hinge
C.Torsion Spring - Longer End
D.Hinge Rod
E.Torsion Spring - Shorter End F. Deflector bracket
G.Push Nut (2)
13
