Craftsman 315.115042 owner manual Product Specifications

•	Table of Contents		2
•	Warranty and	Introduction	2
•	Rules for Safe	Operation	3-4
•	Operation		5-9
•	Accessories		9
•	Maintenance		10
•	Notes		11
•	Exploded View and Parts List		12-13
•	PadsOrdedng/Service		14
	FULL ONE YEAR WARRANTY ON CRAFTSMAN DISC SANDER
	if this rRIIFTSMA II Disc Sander fails to give completesatisfactionwithin one year from the date of purchase,
	RETURNIT TO THE NEAREST8EAR8 STORE IN THE UNITEDETATES,and Seers will repair it, free of charge.

If this rRAFTSHIIN Disc Sander is used for commemial or rental purposes,this warrantyapplies for only90 clays from the date of purchase.

Thiswarranty gives you specificlegal dghts, and you may also have other rightswhich vary from state to state.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

Your sander has many features for making your sanding operation more pleasant and enjoyable. Safety, performanceand dependability have been given top priorityin the design of this tool making it easy to maintain and operate.

_. CAUTION: Carefully read through this entire owner'smanual before usingyour new sander. Pay close attentionto the Rules for Safe Operation, Warnings and Cautions. If you usathis tool pmpedy and onlyfor what it is intended, you will enjoy years of safe, reliable service.

PRODUCT SPECIFICATIONS:

Size of Sanding Disc	7 in.
Size of Rubber Back-up Pad	3-1/2 in.
Input	10 Amperes
Rating	120 Volts, 60Hz, AC only
Spindle Size	5/8 in.
No Load Speed	4,600 RPM

Look for this symbol to point out important safety precautions, It means attentionl!! Your safety is involved,

_k WARNING:

The operation of any sander can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed, We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protectionwhich is marked to comply with ANSI Z87.1.