WARNING: Always wear safety goggles or safety glasses with side shieldswhen operating your
sander. Failure to do so could result in dust, shavings, loose particles or foraign objects being thrown into your eyes, causing possible serious
injury.
KNOW YOUR SANDER
See Figure 1.
Before attempting to use your sender, familiarize yourself with all operatingfeatures and safety requirements.
Your sender is suitable for sanding with coarse, medium, and fine grit sanding discs.
WARNING: If any parts are missing,do not operate this tool until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
ELECTRICAL CONNECTION
Your sander has a precisionbuiltelectric motor, it should be connectedto a power supply that is 120 volts, 60Hz,
AC only (nonmal household eunmnt), Do not operate this tool on directcurrent (DC). A voltage drop of more than 10 percentwill cause a loss of power and the motor will overheat. If your tool does not operate when plugged intoan outlet,
WARNING: Do not allow familiaritywith your sender to make you careless. Remember that a careless fraction of a second is sufficientto inflict
severeinjury.
SWITCHACTUATOR
(BLACK)
AtI'XlI.I_H
HANDLE
Fig, 1
