BladeDiameter | |
Blade Arbor | 5/8 in. |
No Load Speed | 5300 RPM |
Rating | 120 Volts, 60 |
Input | 9 Amperes |
Net Weight | 30 Ibs. |
Cutting Capacity with Miter at 0°/Bevel 0°:
Maximum Cutting Capacity with Miter at 45°/Bevel 0°:
Maximum Cutting Capacity with Miter at 0°/Bevel 45°:
Your Compound Miter Saw has been shipped completely assembled except for the blade and dust guide.
WARNING: If any parts are missing, do not operate this tool until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
•Remove all loose parts from the carton. Separate and check with the list of loose parts. See Figure 2.
•Remove the packing materials from around your
saw.
Carefully lift saw from the carton and place it on a level work surface. Although small, this saw is
heavy. To avoid back injury, get help when needed.
•Do not discard the packing materials until you have carefully inspected the saw, identified all loose parts, and satisfactorily operated your new saw.
•Your saw has been shipped with the saw arm locked in the down position. To release sew arm, push down on top of sew arm and pull out the lock pin. See Figure 4.
•Lift the saw arm by the handle. Hand pressure should remain on the saw arm to prevent sudden rise upon release of the lock pin.
•Examine all parts to make sure no breakage or damage has occurred during shipping.
If any parts are damaged or missing, do not attempt to plug in the power cord and turn the switch on until the damaged or missing parts are obtained and are installed correctly.
7
