CUSTOMER RESPONSIBILITY

MAINTENANCE AND REPAIR INSTRUCTIONS

MAINTENANCE SCHEDULE

Perform these required maintenance procedures at the fre- quency stated in the table. These procedures should also be a part of any seasonal tune-up.

NOTE: Maintenance, replacement, or repair of the emission control devices and system may only be performed by a Sears or other qualified service dealer.

NOTE: Maintenance, replacement, or repair of the emis- sion control devices and system may be perormed by a Sears or other qualified service dealer.

WARNING: To prevent serious injury, never perform

maintenance or repairs with unit running. Always service and repair a cool unit. Disconnect the spark plug wire to ensure that the unit cannot start.

A good preventive maintenance program of regular inspection and care will increase life and improve performance of your chain saw. This maintenance checklist is a guide for such a program.

Cleaning, adjustment, and part replacement may be required, under certain conditions, at more frequent intervals than those indicated.

MAINTENANCE CHECKLIST

AFTER

HOURS OF

EACH USE

OPERATION

 

 

 

 

 

 

 

ITEM

BEFORE EACH USE

 

10

20

CHECK FOR LOOSE SCREWS/

NUTS/BOLTS

CLEAN OR REPLACE THE FILTER

REPLACE FUEL FILTER

REPLACE SPARK PLUG

INSPECT SPARK ARRESTER SCREEN

INSPECT FUEL HOSES

INSPECT VACUUM TUBES

13

Page 13
Image 13
Craftsman 316.794991 manual Maintenance and Repair Instructions, Maintenance Schedule, Maintenance Checklist, Hours