Craftsman 320.2819 Chip Shield Deflector Fig, Always, Dust Collection with Dust

With almost no load on the router motor, the cutting off the sides of the cut in the work piece, producing instead of clean straight sides.

bk has a tendency to bounce a cut with a rippled finish

CHIP SHIELD DEFLECTOR (Fig. 19)
	WARNING:		ALWAYS		Fig.	19
wear eye		protection.		The
chip shield deflector is not
intended as a safety guard.
To remove chip shield from
fixed base, press inward on
tabs until chip shield releases
from base and remove it. To
attach, place chip shield back
in position and flex sides while
pushing it		in until it snaps back
into	place	(See	Fig. 19),			Tabs
,_	WARNING:		The	chip		i:

shield deflector helps keep dust and chips away frc_m the operator; it will

not stop objects larger than woodchips thrown fror_ the bit.

/

CAUTION: ALWAYS have the chip shield deflector in place on the base when operating the router.

WARNING: ALWAYS turn router motor off and u_)plug router from power

source before making any adjustments or installin_ accessories. Failure to turn router motor off and unplug router could result in accidental starting which can cause serious personal injury.

DUST COLLECTION WITH DUST

There is a dust extraction hood included with this router. The hood is sized to accept a 1-1/4 in. vacuum hose adapter, sold sepa- rately.

To attach the adapter onto the fixed base, align two tabs on the adapter with two slots on the port at back of the base, and secure it by turning clock- wise shown in Fig. 20.

EXTRACTION AID PPTER (Fig. 20)

Fig. 20 __._

28190 ManuaLRevised_07_409 i Page 31