Using The Level With A Tripod (Not Included)
Because the Palm Grip Laser Level is a"for-
ward" projection device, itcan be placed on any
reasonably levelflat surface to draw a plumb
vertical line,When used in conjunction with any
standard tripod (1/4-20 UNC threaded fitting)
versatility is further enhanced (See Fig° 1!).
Mounting The Level ToA Tripod (See Fig.12)
1. Attach theAll-Position Leveling Base to
the tripod using the standard 1/4-20 UNC
threaded fitting included with the tripod.
(See Fig° 11).
2. Place the level on the All-Position Leveling
Base. Fig, 11
3_,Push the "ON/OFF" button once to turn
the level. DO NOT point tool in the direction
of your eyes oranyone else's eyes in the
vicinity ofuse,
4. Determine a line with two points A, B(Fig_ 12). Align your laser fan beam to
these points.
A
Fig° 12
48291 ManuaLRevised~06 _0907 Paget0