The Laser line projection is weak
The Laser line is hard to see
Batteries are weak Replace with new batteries
The tool is too far | Move the too! closer to the target |
from the target |
|
The Laser Fineis not projected
The Laser line
projected is not level
Power button is not "ON'*
Polarity of the batteries is incorrect
The level bubbles of the vials are not centered
Check to make sure the power button is in the "ON" position
Reinstallthe batteries according to the polarity indicator in the battery compartment
Attach the laser level to the precision leveling base and turn adjustment knobs until the bubbles are centered in the middle of the two reference lines
Magstic adhesive is not adhering to surface
Magstlc is dirty
Magstic adhesive has expired
Clean Magsttc thoroughly with a damp cloth and let dry
Replace Magstlc material
Magstic adhesive
is not adhering to the tool
"Wall Side" of the adhesive is used on the tool
Magstic adhesive has expired
Make sure the "Tool Side" of the
adhesive Is used on the base of the tool
Replace Magstlc material
V A | = | = | ¥ |
The Laser Level Model Number is found on the cover of this manual. Always mention the Model Number when ordering replacement Magstic adhesive strips.
Parts No, | Part Description | ...............Quantity |
3703724001 | Magstic | 6 Pieces |
48291 Manuel. | Page 15 |
