Craftsman 320.61199 warranty ManualRevised09 0310

Models: 320.61199

1 30
Download 30 pages 23.43 Kb
Page 11
Image 11

Keep the cord and charger from heat to prevent damage to housing or internal parts.

Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic.

An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:

The pins on plug of extension cord are the same number, size and shape as those of the plug on charger.

The cord is properly wired and in good electrical condition

The size is large enough for AC ampere rating of charger as specified below:

The

Cord Length (Feet)

25'

50'

100'

Cord

Size(AWG)

16

16

16

NOTE: AWG = American Wire Gauge

Do not operate the charger with a damaged cord or plug, as this could cause shorting and electric shock. If damaged, have the charger repaired or replaced by an authorized service technician at a Sears Service Center.

Do not operate the charger if it has received a sharp blow, been dropped,

or has otherwise been damaged in any way. Take it to an authorized service technician at a Sears Service Center for an electrical check to determine if

the charger is in good working order.

Do not disassemble the charger. Take it to an authorized service technician at a Sears Service Center when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.

Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It will also help prevent damage to the charger during a power surge.

Risk of electric shock. Do not touch the uninsulated portion of output connector or uninsulated battery terminal.

Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and

possible injury.

61199 Manual_Revised_09

0310

Page 11

Page 11
Image 11
Craftsman 320.61199 warranty ManualRevised09 0310