Craftsman 320.61199 warranty To Detach Battery, Pack Fig, ON/OFF Switch Fig, LED Worklight Fig

TO DETACH BATTERY	Fig. 4
PACK (Fig. 4)

1.Make sure that the tool is "OFF"

2.Depress the battery release buttons located on the both

sides of th of the battery pack to release the battery pack.

3.Pull the battery pack out and remove it from the tool.

A_, CAUTION: When placing

the battery pack in the tool,

be sure that the raised rib on

Fig. 5

battery pack aligns with the groove inside the tool and that the latches snap into place properly. Improper assembly of the battery pack can cause damage to internal components.

_, WARNING: Battery tools are always in operating condition; therefore, the direction-of- rotation selector should always be locked when not in use or carrying the tool at your side.

ON/OFF SWITCH (Fig. 5)

Fig. 6

To turn the tool ON, push the on/off switch forward. To turn it

OFF, push the switch backward.

LED WORKLIGHT (Fig. 6)

The LED worklight, located on the front of the tool, will illuminate when the on/ off switch is in the forward (ON) position. This provides additional light on the surface of the workpiece for operation in lower-light conditions. The LED worklight will turn off when the switch is slid backwards (OFF).

61199 Manual_Revised_09 0310 Page 18