Craftsman 320.61199 R1-,J-,Jaltaiil,i, Adhesive Removal Blade Cut out the grout around tile

r:1-,J-,Jal[t]_aiil[,)_i

ACCESSORY APPLI CATION

Carbide Circular

Adhesive Removal Blade Cut out the grout around tile

Carbide Triangular Rasp Remove tile adhesive residue

Hardened	Steel	Remove	floor coverings and
Scraping	Blade	scrape	off adhesive residue

Cut and remove the damaged part of plasterboard

High Speed Steel Circular Saw Blade

First make two parallel cuts, then break out the piece in between with chisel and sinker to lay the cable and

plaster over

High Carbide steel Straight Edge Flush Cut Blade

Sanding Plate and Sandpaper

Plunging and sawing with a slight rocking motion in wood, plasterboard and soft plastics

1.Rough sanding using grit size 40-80

2.Smooth sanding using grit size 120-180

61199 Manual_Revised_09-0310 Page 23