HOW TO CHARGE THE BATTERY PACK
NOTE: This
A fully discharged battery pack will charge in about 30 minutes in an environment between 32 ° F (0° C) and 104 ° F (40 ° C).
1.Charge the
2.Connect the charger to a power supply.
3.Align the raised ribs of the battery pack with the slot in the charger.
4.Insert the battery pack into the charger (Fig. 2).
5.The charger will communicate with the battery pack to evaluate the condition of the battery pack.
6.The green lights will flash while the battery pack is charging. After charging is complete, the green LED on the charger will be on. The flickering red light indicates a defective battery or a bad connection between the battery and the charger.
7.The battery pack will fully charge if left on the charger, but it will not overcharge.
NOTE: For your convenience, the charger can operate with most generators and inverters rated at 300 watts or higher.
LED FUNCTIONS OF CHARGER (Fig. 3)
LED INDICATOR | BATTERY | RED | GREEN | |||
PACK | LED | LED | ||||
|
|
| ||||
|
|
| Hot/Cold | On | Off | |
_) I/LO | TEMP. | _] | battery | |||
(SEE | MANUAL) |
|
|
|
| |
BATTERY |
| Defective | Flashing | Off | ||
DEFECTIVE |
|
|
|
| ||
CHARGING |
| Charging | Off | Flashing | ||
BATTERY |
|
|
|
| ||
|
|
| Fully | Off | On | |
FULL | _ | charged | ||||
BATTERY |
|
| ||||
ACTION
Charging will begin when battery returns to 32°F
Battery pack or Charger/Adapter is defective
Charging
Charging is complete
61199 ManuaLRevised_09 | 0310 | Page 16 |
