Craftsman 358.351080 manual Service And Adjustments, Wind Up Spring

SERVICE AND ADJUSTMENTS

•Pull out 10" of rope and catch rope in notch in the pulley.

•Carefully turn the pulley two complete turns clockwise, keeping the rope againstthe notchto wind the spdng.

•While holding the pulley ratchet, pull the excess rope through the starter rope hole.While holding tension on the rope, let rope slowlyrewind into the housing.

Wind Up Spring

r_,.:

Rewind for-

Tension

Figure48

"C_'-

°

_T._._

r

•Reinstall fan housing by aligningthe fan housing to the chassis.Then while holdingthe fan housing against the

chassis, pull the rope handle out until you feet the fan housing drop into place against thechassis. Slowly, let the rope rewind into starter housing.

•Reinstall the 4 fan housing screws and tighten the 2 cylinder cover screws. Figure 44.

• - 24-