![Trimming](/images/new-backgrounds/96795/9679529x1.webp)
Trimming
MOWING - Your trimmer is ideal for
mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the
ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.
Mowing
3 inches (8 cm above ground
SCALPING - The scalping technique removes unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Al- low the tip of the line to strike the ground around trees, posts, monu-
ments, etc= This technique increases line wear.
Scalping
!/,_1
SWEEPING - The fanning action of the rotating line can be used to blow away loose debris from an area. Keep the line parallel to and above the area surface and swing the tool from side to side.
'_ Sweeping
A
MAINTENANCE SCHEDULE
_, WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.
CARE & MAINTENANCE TASK
Check for loose fasteners and parts
Check for damaged or worn parts
Inspect and clean unit and labels Clean air filter
Inspect muffler and spark arresting screen
Replace spark plug
GENERAL RECOMMEN DATIONS
The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty,
the operator must maintain unit as instructed in this manual. Various ad-
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of operation
Every 50 hours of operation
Yearly
CHECK FOR LOOSE
FASTENERS AND PARTS
•Spark Plug Boot
•Air Filter
•Housing Screws
•Assist Handle Screw
•Debris Shield
justments will need to be made peri- odically to properly maintain your unit.
15