6.Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot.
7.With your finger between the lines, wrap the lines evenly and firmly
around the spool in a clockwise direction.
8.Position the lines in the guide slots.
Guide Slot
Guide
Slot
9.Insert the ends of the lines through exit holes in the sides of the cover.
10.Place the spool in the cover.
Spool
Cover
11.Make sure the lines are not caught between the spool and the cover.
12.Reinstall the spool and cover onto the trimmer head. Push until cover
snaps into place.
CARBURETOR ADJUSTMENT
WARNING: Keep others away
when making idle speed adjustments. The trimmer head or any optional at-
tachment will be spinning during most of this procedure. Wear your protective equipment and observe all safety pre- cautions. After making adjustments, the trimmer head or any optional attach- ment must not move/spin at idle speed.
The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the fol- lowing conditions:
•Engine will not idle when the throttle is released.
•The trimmer head or optional attach- ment moves/spins at idle.
Make adjustments with the unit sup- ported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making adjustments. Keep all parts of your body away from the cutting attachment and muffler.
Idle Speed Adjustment
Allow engine to idle. Adjust speed until engine runs without trimmer head or optional attachment moving or spin- ning (idle too fast) or stalling (idle speed too slow).
•Turn idle speed screw clockwise to
increase engine speed if engine stalls or dies.
•Turn idle speed screw counterclock- wise to decrease engine speed if trimmer head or optional attachment moves or spins at idle.
_WARNING: | Recheck the idle |
speed after each adjustment. The trimmer head or optional attachment must not move or spin at idle speed to
avoid serious injury to the operator or others.
Idle Speed Screw
Air Filter Cover
If you require further assistance or are unsure about performing this proce-
dure, contact your Sears Service Cen- ter or call our customer assistance
help line at
