KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCU]q'ERATTACHMENT Compare the illustrations with your unit to familianze
yourself with the location of vadous controls and adjustments. Save this manual for future reference.
BLADE
The BLADE is designed for cutting grass, weeds, and brush up to 1/2 inch (1 cm) in diameter.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and is designed for cutting grass and light weeds.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional at- tachments are:
Edger | 358.792402 |
Cultivator | 358.792410 |
Blower | 358.792421 |
BLADE SHIELD
The BLADE SHIELD provides protection from the spinning blade.
TRIMMER SHIELD
The TRIMMER SHIELD provides protec- tion from the spinning trimmer head.
Upper Shaft
Coupler
Lower
Attachment
_WARNING: Always disconnect
powerhead spark plug before remov- ing or installing attachments.
REMOVING BRUSHCUTTERAT-
TACHMENT (OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION: When removing or instal-
ling attachments, place the powerhead and attachment on a flat surface for
stability.
1.Loosen the coupler by turning the knob counterclockwise.
TIGHTEN Knob
2.Press and hold the locking/release button.
Locking/Release
Button
Coupler m | Upper Shaft |
Lower Attachment |
|
3.While securely holding the upper shaft, pull the attachment straight out of the coupler.
10
