b. USE THE

FOLLOWING:

 

 

M

 

 

1GALLON

+

--OR--

=

REGULAR

UNLEADED

 

 

 

GASOLINE

 

 

 

2. HOW TO MIX FUEL AND FILL TANK

-a. Pour 112gallon gasoline into an approved marked

container. Do not try to mix fuel directly in the fuel tank.

b.Add entire measure of 2-cycle engine oil.

c.Cover containertightly and shake for one minute.

d.Add remainder of gasoline.

e.Cover containertightly and shake again.

f.Remove the fuel cap. Referto "Specifications", page 2, for fuel cap location.

g.Fill the tank using a spout or funnel.

h.Reinstall the fuel cap securely.

3. IMPORTANT POINTS TO REMEMBER

a. Use only recommended fuel mixtures.

b.Eliminate all sources of sparks or flame in the areas where fuel is mixed, poured, or stored. There should be no smoking, open flames or work that could cause sparks.

C.Use an approved, marked container for all fuel purposes.

d, Mix and pour fuel in an outdoor area. Store fuel

in a cool, dry, well-ventilated place. Gasoline vapors are harmful to your health and can cause serious hazards, such as explosion and fire.

e, Wipe up all fuel spills before starting the engine.

f.Move at least 10 feet (3 meters) away from fuel and fueling site before starting the engine.

B. PRE-OPERATION CHECKS

Before operating your unit, always:

1.v, CHECK OVER SAFETY RULESAND PRECAU-

TIONS in this Operator'sManual. Make certain you completely understand and follow e&ch one.

2._, CHECK THE AtR FILTER

Clean the filter if dirty before operating the unit. For location, see page 14.

,v-CHECKTHE UNIT FOR LOOSE BOLTS, NUTS,

OR FITTINGS.

Tighten, repair or replace parts as necessary. Tools required are shown on page 5. Use only recom- mended, genuine Sears/Craftsman replacement parts.

4 _-CHECKTHE FUEL TANK.

Fill with a clean, fresh fuel mixture according to instructionsin fuel mixturesection.

C. STARTING INSTRUCTIONS

1. HOW FUEL INJECTION STARTING TM WORKS

FUEL INJECTION STARTINGTMprovides a quick, start feature by. injecting a precise amount of fuel .directly into the. carburetor manifold which provides a rich fuel mix for the first few seconds of operation.

INJECTOR BuI-r ON

-. • Each-time the injector button is pressed and -.+.:_----released, fuel is forced'from'the fuel tank to

'- the accumulator c:hamber.

•The accumulator chamber provides a sec- ondary fuel supply until the carburetor can obtain fuel through the primary line

CARBURETOR

DRAIN

FUEL INJECTION STARTING DEVICE (PATENT PENDING)

Figure 6

•When the accumulator chamber is full, fuel is injected into the carburetor manifold to provide a rich mixture for starting.

Excess fuel escapes through a drain to prevent the engine from flooding if the injector button is pressed too many times. As a result, a few drops of fuel may appear on the ground during the starting procedure.

The number of injections required will depend on temperature conditions and the time elapsed since the engine was last started.

Page 6 Page 8
Page 7
Image 7
Craftsman 358.796131- 26.2CC PRE-OPERATION Checks, Starting Instructions HOW Fuel Injection Starting TM Works
Page 6 Page 8

358.796131- 26.2CC specifications

The Craftsman 358.796131 is a robust and reliable 26.2CC gas-powered string trimmer designed for both homeowners and professionals who require efficient gardening tools. Equipped with a powerful 26.2cc 2-cycle engine, this string trimmer delivers dependable performance for a variety of lawn care tasks, including trimming, edging, and clearing overgrown areas.

One of the standout features of the Craftsman 358.796131 is its lightweight and ergonomic design. Weighing in at only 11.5 pounds, this trimmer is comfortable to handle, allowing users to operate it for extended periods without fatigue. The well-balanced construction ensures optimal maneuverability, making it easy to navigate around flower beds, trees, and other obstacles in your yard.

In terms of technology, the Craftsman 358.796131 incorporates the Easy Start system, which significantly reduces the effort required to start the engine. This feature minimizes the pull required on the starter cord, allowing for quick and hassle-free starts every time. This is particularly beneficial for users who may struggle with traditional starting methods, as it enhances the overall user experience.

The trimmer is also equipped with a 17-inch cutting swath, allowing users to cover more ground in less time. The dual-line bump feed head provides a continuous flow of line, ensuring that the cutting area is maximized with minimal interruptions. The ability to easily advance the line by simply bumping the head against the ground allows for convenient operation while working in various terrains.

Another noteworthy characteristic of the Craftsman 358.796131 is its durability. The trimmer is constructed with high-quality materials and components designed to withstand the rigors of regular use in tough outdoor conditions. The solid build ensures longevity, making it a worthwhile investment for anyone looking to keep their outdoor spaces well-maintained.

Moreover, the Craftsman trimmer includes a variety of attachments and accessories, enhancing its versatility. These accessories can help tackle different tasks, from edging to clearing taller weeds and brush.

In conclusion, the Craftsman 358.796131 is a powerful, user-friendly, and versatile solution for lawn care enthusiasts. Its combination of performance, technology, and durability makes it an excellent choice for both residential and professional lawn maintenance, ensuring that users can achieve a well-groomed yard with ease and efficiency.
Top Page Image Contents