16. Neverdirectdischargeat bystanders or
allow anyone in front of the snow thrower.
17.Disengage power to the auger/impeller when snow thrower is transported or not in use.
4.Maintain or replace safety and instruc- tion labels, as necessary.
5.Run the snow thrower a few minutes after throwing snow to prevent freeze- up of the auger/impeller.
18.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as tire chains, electric start kits, etc).
19.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.
MAINTENANCE AND STORAGE
1.Check shear bolts and other bolts
frequently for proper tightness to be sure the snow thrower is in safe
working condition.
2.Never store the snow thrower with fuel
in the fuel tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.
3.Always refer to operator's manual instructions for important details if the snow thrower is to be stored for an
/_k WARNING: This snow thrower is for
use on sidewalks, driveways and other ground level surfaces.
Caution should be exercised while using on steep sloping surfaces. DO NOT USE
SNOW THROWER ON SURFACES ABOVE GROUND LEVEL such as roofs of residences, garages, porches or other such structures or buildings.
extended | period. |
|
|
|
|
Contents of | Parts | Bag |
|
|
|
|
|
| |||
11- Fuel Stabilizer(not shown) |
|
|
| ||
1 - Warranty Card (not shown) | _ | I | _ | ||
2- Parts Bags (not shown) | I | \\ | |||
* | I | I | \\ | ||
|
| *2Do- | II |
| |
on top of your belt cover. |
|
|
| ||
|
| Spare Spacers | I |
|
|
2 - 5/16 In. Hsx Nuts |
| /_1_ |
| ||
| (_ | _J |
| *2 - Shear Pins |
|
_ | _1 | " _tatdehoMw°nt°rcC°a_dize) |
3 - Carriage | Bolts, | .00 In. | 5 - Flatwashers | 11/32 In. | 3 |
4
