snow thrower Indoors or In

_ARNING: Never store your an enclosed, poorly venti-

lated area. If gasoline remains in the tank, fumes may reach an open flame, spark or pilot light from a fur- nace, water heater, clothes dryer, cigarette, etc.

NOTE: To prevent engine damage (if snow thrower is not used for more than 30 days) follow the steps below.

SNOW THROWER

1.Thoroughly clean the snow thrower.

2.Lubricate all lubrication points. See the Maintenance section.

3.Be sure that all nuts, bolts and screws are securely fastened. In- spect all visible moving parts for damage, breakage and wear. Re- place if necessary.

4.Touch up all rusted or chipped paint surfaces; sand lightly before paint- ing.

5.Cover the bare metal parts of the blower housing auger and the im- peller with rust preventative, such as a spray lubricant.

NOTE: A yearly checkup or tune-up by a Sears service center is a good way of

ensuring that your snow thrower will

provide maximum performance for the next season.

ENGINE

,_ WARNING: Drain the gaso-

line outdoors, away from fire or flame.

Gasoline must be removed or treated to prevent gum deposits from forming in the fuel tank, filter, hose, and carburetor during storage. Also, during storage al-

cohol blended gasoline that uses etha- nol or methanol (sometimes called gasohol) attracts water. It acts on the gasoline to form acids which damage the engine.

F-OOIO60J

1.To remove gasoline, run the engine until the fuel tank is empty and the engine stops.

2.If you do not remove the gasoline, use fuel stabilizer supplied with unit

or purchase Craftsman Fuel Stabi- lizer No. 3550. Add fuel stabilizer to

any gasoline left in the tank to mini- mize gum deposits and acids. If the fuel tank is almost empty, mix stabi- lizer with fresh gasoline in a sepa- rate container and add some to the fuel tank.

3.Always follow the instruction on the stabilizer container. After the stabi- lizer is added to the fuel tank, run the engine at least ten minutes to allow the mixture to reach the car- buretor.

4.Change the engine oil.

5.Lubricate the piston/cylinder area. First, remove the spark plug and squirt a few drops of clean engine oil into the spark plug hole. Next, cover the spark plug hole with a rag to absorb oil spray. Then, pull two or three times on the recoil starter rope to rotate the engine. FinaLly, install the spark plug and attach the spark plug wire.

OTHER

t.If possible, store your snow thrower indoors and cover it to give protec- tion from dust and dirt.

2.If the machine must be stored out-

doors, block up the snow thrower to be sure the entire machine is off the

ground,

3.Cover the snow thrower with a suit- able protective cover that does not retain moisture. Do not use plastic.

IMPORTANT: Never cover snow

thrower while engine and exhaust areas are still warm.

29

Page 28 Page 30
Page 29
Image 29
Craftsman 536.88113 operating instructions Other, Line outdoors, away from fire or flame
Page 28 Page 30

536.88113 specifications

The Craftsman 536.88113 is a versatile snow blower designed for homeowners who need power, reliability, and convenience during the winter months. This robust machine offers impressive features that cater to various snow removal needs, making it a favorite among those living in snowy regions.

One of the standout features of the Craftsman 536.88113 is its powerful engine. Equipped with a reliable 24-inch wide clearing path, it efficiently handles heavy snowfalls, ensuring that driveways and walkways remain clear and safe. The engine provides ample power to clear even the most stubborn snow piles, allowing users to tackle heavy-duty jobs with ease.

Another highlight of this snow blower is its self-propelling technology. This feature allows the user to adjust the speed settings according to their comfort level and the conditions of the terrain. The adjustable speed is particularly useful for navigating through different snow depths and types, providing a more personalized and efficient snow removal experience.

The Craftsman 536.88113 also incorporates the latest in snow throwing technology. Its high-performance auger system is designed to throw snow up to 30 feet away, which minimizes the chances of snow piling up behind the cleared area. This capability not only enhances performance but also increases the efficiency of the snow removal process.

Comfort and usability are prioritized in the design of this snow blower. It features an ergonomic handle with padded grips, ensuring that users can operate the machine comfortably, even during prolonged use. Additionally, the easy-to-access controls allow for flexible operation, enabling users to adjust settings quickly without breaking their stride.

Durability is a hallmark of the Craftsman brand, and the 536.88113 is no exception. Constructed with high-quality materials, this snow blower is designed to withstand the rigors of harsh winter conditions. The durable housing protects the internal components, ensuring longevity and consistent performance season after season.

In conclusion, the Craftsman 536.88113 combines power, efficiency, and comfort, making it an excellent choice for winter snow removal. Its user-friendly features, robust construction, and advanced throwing technology set it apart, ensuring homeowners are well-equipped to handle the challenges of winter weather. Whether you have a small walkway or a large driveway, this snow blower meets the needs of various tasks, delivering reliable results each time.
Top Page Image Contents