2.Release the starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the

two previous steps until the engine starts. Then continue with the direc-

tions for cold start.

To help prevent possible freeze-up of recoil starter and engine controls, pro- ceed as follows after each snow remov- al job.

1.With the engine running, pull the starter rope hard with a continuous full arm stroke three or four times.

Pulling of starter rope will produce a loud clattering sound. This is not harmful to the engine or starter.

2.With the engine not running, wipe all snow and moisture from the carbu- retor cover in area of control levers.

Also move throttle control, choke control, and starter handle several times.

gine indoors or in enclosed,

,_ WARNING: Never run en- poorly ventilated areas. En-

gine exhaust contains CARBON MONOXIDE, AN ODORLESS AND DEADLY GAS. Keep hands, feet, hair and loose clothing away from any moving parts on engine and snow thrower.

The temperature of muffler and

nearby areas may exceed 150°F.

Avoid these areas.

DO NOT allow children or young teenagers to operate or be near snow thrower while It Is operating.

to remove any Item that may

_b ARNING: Do not attempt become lodged in auger

without taking the following precau- tions:

Release auger drive lever.

Move throttle lever to stop posi- tion.

Remove (do not turn) Ignition key.

Disconnect spark plug wire. Do not place your hands in the auger or discharge chute. Use s pry bar.

SNOW THROWING TIPS

1.For maximum snow thrower efficien- cy in removing snow, adjust ground speed, NEVER the throttle. Go slower in deep, freezing or wet snow. Ifthe wheels slips, reduce forward speed. The engine is de- signed to deliver maximum perfor- mance at full throttle and should be run at this power setting at all times.

2.Most efficient snow throwing is ac- complished when the snow is re-

moved immediately after if falls.

3.For complete snow removal, slightly overlap each path previously taken.

4.The snow should be discharged down wind whenever possible.

5.For normal usage, set the skids so that the scraper bar is 1/8" above the skids. For extremely hard- packed snow surfaces, adjust the skids upward so that the scraper bar touches the ground.

6.On gravel or crushed rock surfaces, set the skids at 1-1/4" below the scraper bar. See To Adjust Skid Height paragraph in the Service & Adjustments section of this manu- al. Rocks and gravel must not be

picked up and thrown by the ma- chine.

7.After the snow throwing job has been completed, allow the engine to idle for a few minutes, which will melt snow and accumulated ice off the engine.

8.Clean the snow thrower thoroughly after each use.

9.Remove ice and snow accumulation and all debris from the entire snow thrower, and flush with water (if pos- sible) to remove all salt or other chemicals. Wipe snow thrower dry.

F-OO_O60J17

Page 16 Page 18
Page 17
Image 17
Craftsman 536.88113 operating instructions Snow Throwing Tips, Moved immediately after if falls
Page 16 Page 18

536.88113 specifications

The Craftsman 536.88113 is a versatile snow blower designed for homeowners who need power, reliability, and convenience during the winter months. This robust machine offers impressive features that cater to various snow removal needs, making it a favorite among those living in snowy regions.

One of the standout features of the Craftsman 536.88113 is its powerful engine. Equipped with a reliable 24-inch wide clearing path, it efficiently handles heavy snowfalls, ensuring that driveways and walkways remain clear and safe. The engine provides ample power to clear even the most stubborn snow piles, allowing users to tackle heavy-duty jobs with ease.

Another highlight of this snow blower is its self-propelling technology. This feature allows the user to adjust the speed settings according to their comfort level and the conditions of the terrain. The adjustable speed is particularly useful for navigating through different snow depths and types, providing a more personalized and efficient snow removal experience.

The Craftsman 536.88113 also incorporates the latest in snow throwing technology. Its high-performance auger system is designed to throw snow up to 30 feet away, which minimizes the chances of snow piling up behind the cleared area. This capability not only enhances performance but also increases the efficiency of the snow removal process.

Comfort and usability are prioritized in the design of this snow blower. It features an ergonomic handle with padded grips, ensuring that users can operate the machine comfortably, even during prolonged use. Additionally, the easy-to-access controls allow for flexible operation, enabling users to adjust settings quickly without breaking their stride.

Durability is a hallmark of the Craftsman brand, and the 536.88113 is no exception. Constructed with high-quality materials, this snow blower is designed to withstand the rigors of harsh winter conditions. The durable housing protects the internal components, ensuring longevity and consistent performance season after season.

In conclusion, the Craftsman 536.88113 combines power, efficiency, and comfort, making it an excellent choice for winter snow removal. Its user-friendly features, robust construction, and advanced throwing technology set it apart, ensuring homeowners are well-equipped to handle the challenges of winter weather. Whether you have a small walkway or a large driveway, this snow blower meets the needs of various tasks, delivering reliable results each time.
Top Page Image Contents