CUSTOMER | RESPONSIBILITIES |
| ||||
MAINTENANCE SCHEDULE |
|
|
|
|
|
|
RLL IN DATESASYOUCOMPLETE |
|
|
|
|
|
|
REGULARSERVICE | HOURLY | OPERATING INTERVAL | SERVICE DATES | |||
|
| Every25 | Every50 | Every 100 |
| |
| Before Hours or Hoursor Hours or |
| ||||
MAINTENANCE TASK | EachUse | Yearly | Yeady | Yeady |
| |
PRESSURE WASHER |
|
|
|
|
|
|
Check/cleaninletfilter and screen | XV |
|
|
|
|
|
Check highpressure hose. | X |
|
|
|
|
|
Check detergenthose. | X |
|
|
|
|
|
Check gunand wand for leaks. | X |
|
|
|
|
|
Check pumpoil. • |
|
|
| X |
|
|
Purgepumpof air and con_nirnents | _ X | , |
|
|
|
|
ENGINE |
|
|
|
|
|
|
Check oillevel. | X |
|
|
|
|
|
Change engine oil. • |
|
|
| X* |
|
|
Retorquehead bolts. |
|
|
| X |
|
|
Serviceair cleaner. |
|
| X** |
|
|
|
Clean/replacespark plug. |
|
|
|
| X |
|
Clean spark arrestorscreen. |
|
|
|
| X |
|
Preparefor storage. | Prepare unitfor storageif it isto remain idle |
| ||||
| longer than 30 days |
|
|
|
V Cleanif dogged. Replaceifperforated torn. t Changeoilafterfirst8 hours,thenafterevery50 hours.
*Change, scoam'when oporati_,g u_texheavyloadorhighambi_nt temperature. _* Cle_anrao_oft_n_m6vrdustyconditionsorwhenalrborncdebrislspr_se_
GENERAL RECOMMENDATIONS | PRESSURE WASHER MAINTENANCE |
The warranty of the high pressure washer does not cover items that have been subjected to operator abuse or neg- ligence. To receive full value from the warranty, operator must maintain high pressure washer as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your high pressure washer.
All adjustments in the Service and Adjustments section of this manual should be made at least once each season.
Once a year you should replace the spark plug and clean or replace the air filter and check the gun and wand assembly for wear. A new spark plug and clean air filter assure proper
BEFORE EACH USE
•Check engine oil level.
•Check water inlet filter and
•Check high pressure hose for leaks.
tCheck detergent inlet hose and fitter for damage.
=Check gun and wand assembly for leaks.
•Purge pump of air and contaniments.
Check and Clean Inlet Supply Filter and Inlet Screen: Remove
Check High Pressure Hose: High pressure hose can develop leaks from wear, kinking, abuse. Inspect hose each time before using it. Check for cuts, leaks, abrasions or bulging of cover, or damage or movement of couplings.
If any of these conditions exist, replace hose immediately.
ADANGER: WATER SPRAYING FROM A LEAK IS CA- I PABLE OF INJECTINGMATERIALINTOSiON.NEVER [
REPAIR HIGH PRESSURE HOSE. REPLACE WITH HOSETHATMEETSYOUR PRESSUREWASHER,MINIMUMPRESSURERATINGOF
Check Detergent Hose: Examine the filter on the deter- gent hose and clean if clogged, Hose should fit tightly on barbed fitting. Examine hose for leaks or tears. Replace the filter or hose if either is damaged.
Check Gun and Wand: Examine hose connection to gun and make sure it is secure. Test trigger by pressing it and making sure it springs back into place when you release it.
Put safety latch in ON position and test trigger. You shoulF not be able to press trigger.
Check Pump Oil: Refer to PUMP MAINTENANCE fQ_ information.
]4